SPRAY HARD ROCK LINER 2C MATTE BLACK

Hard Rock Liner 2C textured paint has made a name for itself in the automotive scene not only for its durable surface but also for its aggressive and unique appearance. Hard Rock Liner 2C textured paint in a spray can is ideal for spraying small parts, rims, side mirrors, or bumpers. A compressor or separate spray gun is not required.

Our Hard Rock Liner 2C textured paint uses an innovative 2-component system:
The hardening agent is already in the can, which means you can say goodbye to messy mixing. Just pierce the hardening agent cartridge with the push button, shake, and you're done!

aggressive appearance
variable structure
Extremely robust and scratch-resistant
highly resistant to chemicals and temperature
Ideal for spraying small parts such as rims, side mirrors or bumpers
Application
Sand the surface. Clean and dry the surface to be sprayed, then degrease with FOLIATEC.com pre-cleaner for car bodies (item no. 79934).
Preparation of the 2C spray can:
Shake the can well before use. Remove the red button from the lid immediately before spraying.
Turn the can 180º and attach the red push button to the pin at the base of the can.
Using the ball in your hand, press the red button all the way down. Shake the can well again after activating it.
The can is now ready for use.
Note: After activating the hardener, the can processing time is approximately 1.5 hours / 20°C.

Apply the Hard Rock Liner in 2 spray coats, spraying distance approx. 70 - 110 cm. Drying time: leave 5 - 10 minutes between each coat.
After 60-70 minutes, the Hard Rock Liner is touch-resistant and should be left to dry for about 24 hours at 20°C.
For detailed information, please refer to the instruction manual.

Frequently Asked Questions
How effective is the Hard Rock Liner 2C Spray?
One can is enough to cover a surface of approximately 1 square meter.

How sensitive is the Hard Rock Liner to dirt?
Due to its extremely hard and robust surface, the Hard Rock Liner can be easily cleaned despite its structure.

How should the Hard Rock Liner be cleaned?
Vehicles coated with Hard Rock Liner can be easily cleaned in a textile car wash tunnel or with a soft brush and car shampoo.

Can the Hard Rock Liner be overpainted?
No, it is not possible to overpaint.

How long do I have to wait before I can drive my vehicle again?
The Hard Rock Liner dries after 24 hours so the vehicle can be driven again. It reaches its full final hardness after 6-7 days.

Do I need to pre-treat or sand the varnish?
The paint must be dry, dust-free, and degreased. Using 400-grit sandpaper can further improve adhesion.

Danger notice

Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes severe eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapors/spray. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Repeated exposure may cause skin dryness or cracking. Possible accumulation of explosive mixtures without adequate ventilation. Contains isocyanates. May cause an allergic reaction. Contains hexamethylene diisocyanate, oligomers, n-butyl acetate, acetone, 2-methoxy-1-methyl acetate.