HARD ROCK LINER SET BLACK PAINT 2 5 L HARDENER 0 5 L

PRODUCT INFORMATION Our newly developed Hard Rock Liner gives a new dimension to car design and provides a real "Wow!" effect: The rough, coarse look is not only a real eye-catcher, but also offers tremendous protection against damage and external influences. For an aggressive spray-on look ? Extremely robust, scratch-resistant, highly chemical and temperature-resistant Removable - in combination with FOLIATEC.com Hard Rock Liner base coat The set includes: 2 liters HARD ROCK LINER 0.5 L HARD ROCK LINER Product suggestion: Best used in conjunction with our special Hard Rock Liner base coat so that the Hard Rock Liner can be easily removed. APPLICATION Dismantle all easily removable car parts. Mask all surfaces that are not to be coated. Mask the rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect the wheel wells and underbody of the vehicle from spray mist. Clean and dry the surface to be sprayed, including the edges, then degrease it using the FOLIATEC.com Carbody Spray Film pre-filter (item no. 79934). After cleaning, remove any remaining dust with a feather duster. Preparing the Hard Rock Liner: Shake the hardener well in the Hard Rock Liner for approximately 2 minutes. Fill the bottle of the spray gun, push down the cap, break the seal, and screw the spray gun onto the bottle. Applying the Hard Rock Liner with the FOLIATEC.com Hard Rock Liner Gun (item no. 79935): Apply the Hard Rock Liner at a slow pace and with a pressure of 2.5 - 3 bar until a coverage of approximately 50% is reached. After approximately 60 minutes, a second coat should be applied for 100% coverage. Note: After 60 minutes, the Hard Rock Liner is powder-dry and should be allowed to dry for approximately 24 hours at a constant temperature. For further instructions, see the APPLICATION sheet.