HARD ROCK LINER BASECOAT 2 5 LITERS

PRODUCT INFORMATION Hard Rock Liner Basecoat acts as the base of our Hard Rock Liner. It was developed to make Hard Rock Liner removable again. Ready to spray, can be painted with FOLIATEC.com Hard Rock Liner – easy to remove. APPLICATION Dismantle all easily removable parts of the car. Mask all surfaces that are not to be coated. Mask rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel housings and the underbody of the vehicle from spray mist. Clean and dry the surface to be sprayed, including the edges, then degrease using the FOLIATEC.com Carbody Spray Film Pre-Filter (item no. 79934). After cleaning, remove any remaining dust with a feather duster. Applying Hard Rock Liner Base Coat with the FOLIATEC.com DIY Spray System: Apply Hard Rock Liner Base Coat in 2 generous coats. Work at a medium pace on level 2 and set the amount control on the pistol grip to level III or IIII. Applying with a Spray Gun: Apply Hard Rock Liner Base Coat in 2 generous coats at a medium pace. Use a 2.0 mm spray nozzle with a pressure of 2 - 3 bar in a suitable spray booth. Flash for 30 minutes after the first spray coat. Note: Can be recoated with Hard Rock Liner once completely dry (after 4 - 5 hours at 20°C depending on the thickness of the coats). For further instructions, please read the APPLICATION sheet.