HARD ROCK LINER SET BLACK PAINT 2 5 L HARDENER 0 5 L

PRODUCT INFORMATION Our newly developed Hard Rock Liner gives a new dimension to car design and provides a real "Wow!" effect: the rugged, tough look is not only a real eye-catcher, but also offers tremendous protection against damage and external elements. For an aggressive look? Extremely robust, scratch-resistant, highly chemical and temperature resistant, removable - in combination with the FOLIATEC.com Hard Rock Liner base coat. The set includes: 2 liters of HARD ROCK LINER, 0.5 liters of HARD ROCK LINER. Product suggestion: It is best used in conjunction with our special Hard Rock Liner base coat so that the Hard Rock Liner can be easily removed. APPLICATION Remove all easily removable car parts. Mask off all surfaces that should not be coated. Mask off rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect the wheel wells and the underside of the vehicle from overspray. Clean and dry the surface to be sprayed, including the edges, then degrease using the FOLIATEC.com Carbody Spray Film pre-filter (item no. 79934). After cleaning, remove any remaining dust with a duster. Preparing the Hard Rock Liner: Shake the hardener thoroughly into the Hard Rock Liner for approximately 2 minutes. Fill the spray gun bottle, push in the cap, break the seal, and screw the spray gun onto the bottle. Applying the Hard Rock Liner with the FOLIATEC.com Hard Rock Liner Spray Gun (item no. 79935): Apply the Hard Rock Liner at a slow pace and a pressure of 2.5–3 bar until approximately 50% coverage is achieved. After approximately 60 minutes, a second coat should be applied for 100% coverage. Note: After 60 minutes, the Hard Rock Liner is powder-dry and should be left to cure for approximately 24 hours at a constant temperature. For further instructions, please read the APPLICATION sheet.