FRAME DEFENDER PAINT PROTECTION FILM SET 31 PIECES

The Frame Defender Paint Protection Film Kit is a quick and easy way to protect your bike's paintwork from stone chips, scratches, wear and tear, and fading, helping to maintain its value. The universal 31-piece set, made of high-strength polyurethane material, is easy to apply and easy to remove.

Universal 31-Piece Set, Pre-Cut, Ready to Use
Available in clear or frosted glass
EXTREMELY ROBUST: The high-strength polyurethane material is resistant to cold, heat, humidity, ice, salt, and UV radiation. Even high-pressure cleaners are no problem for the tough protective film.
FUNCTIONS AS A PAINT PROTECTION FILM: Protects the frame against stone chips, scratches, wear and tear and maintains the value of the bicycle.
EASY ASSEMBLY: The self-adhesive film can be easily mounted without bubbles using a wet application method.
EASY TO REMOVE: Even after years of use, the paint protection film leaves no residue during removal and therefore protects the paint.
Tip: We recommend leaving the film on the paint for a maximum of two years. Then it should be replaced!

Application
Thoroughly clean the surface where the film will be applied, removing all traces of grease and dust. Use silicone remover, isopropyl alcohol, or rubbing alcohol (alcohol- and benzene-free) for cleaning. Dry the surface with a lint-free cotton cloth.
Remove the backing paper.
Generously spray the surface and the adhesive side of the film with a mixture of water and a few drops of dish soap.
Place the film piece on the surface and position it.
Spray the film surface again, press it down, and smooth it out from the center using a rubber squeegee or a lint-free cotton cloth. Use a cotton cloth to remove or vacuum up any excess liquid.