FOLIATEC SPRAY SYSTEM POWERED BY WAGNER MATTE WHITE 2X5L

PRODUCT INFORMATION FOLIATEC.com Spray System: The revolutionary coating system for vehicles! Our newly developed FOLIATEC.com Carbody Spray Film transforms your car's appearance in the blink of an eye. FOLIATEC.com is one of the first manufacturers to offer ready-to-spray metallic colors. In our helpful DIY Carbody Spray Film Pro Set, we offer a package with a high-quality FOLIATEC spray system powered by WAGNER, a world-leading manufacturer of surface coating equipment. The spray system was specially developed for use with FOLIATEC.com Carbody Spray Film, so you can get started with ease. Best of all: the applied coating can be easily removed at any time without any tools. Sufficient for complete vehicle coatings. Very good opacity. Attractive appearance and a smooth spray finish. Protection against scratches, salt, weather conditions, and chipping of the original paint. UV resistant. Applicable to any non-absorbent surface. Easy to remove. 1 liter is sufficient for a maximum of approx. 2 square meters The Pro set includes: FOLIATEC spray system with paint gun, compressor, and 12 m hose - powered by WAGNER 2 x 5 liters CARBODY SPRAY FILM 2 x 500 ml THINNER 1 pair of disposable protective gloves Suggestion for Magic Green-Purple: The professional set consists of 5 liters of matte black and 5 liters of Magic Green-Purple (color-changing effect). We recommend applying two coats of matte black with a 10-minute flash-off time, then applying two coats of Magic Green-Purple. Important: The matte black must be dry before applying Magic Green-Purple. Depending on the amount of thinner, it lasts approximately 3 hours. *This offer cannot be combined with other discounts/promotions. APPLICATION All easily removable parts of the car should be detached. Mask off all surfaces that should not be coated. Mask off rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel wells and the underside of the vehicle from overspray. Clean and dry the surface to be sprayed, including edges, then degrease with FOLIATEC.com Carbody Spray Film Pre-Filter (item no. 79934). After cleaning, remove any remaining dust with a duster. Application with the FOLIATEC.com spray system: Apply FOLIATEC.com Carbody Spray Film in 4 to 5 generous coats. On horizontal surfaces (roof or hood), work slowly and at level 1 or 2: set the quantity control on the spray gun handle to level IIII. On vertical surfaces, work at a medium pace and level 2. If necessary, reduce the quantity control on the spray gun handle. Use only in suitable workshops and garages. Reduce ventilation if working in a spray booth. Spray gun application: Apply FOLIATEC.com Carbody Spray Film in 4 generous coats at medium speed. Use a 2 to 2.5 mm spray nozzle at a pressure of 3 to 5 bar in a suitable spray booth. Flash for 10 minutes after each coat. Note: The Carbody Spray Film is completely dry after 60 minutes. After 24 hours, the vehicle is ready to drive again. For detailed information, refer to the instruction manual.