DIY SPRAY SYSTEM STANDALONE 1 PIECE

PRODUCT INFORMATION FOLIATEC.com Spray System: The revolutionary vehicle coating system! Our newly developed FOLIATEC.com Carbody Spray Film transforms your car's appearance in no time. The high-quality FOLIATEC spray system, powered by WAGNER, a world-leading manufacturer of surface coating equipment, was specially developed for use with FOLIATEC.com Carbody Spray Film, so you can get started with ease. FOLIATEC spray system with paint gun, compressor, and 12 m special air hose. Easy application: fill with paint, insert the plug, and it's ready to use. Adjustable spray pattern. APPLICATION All easily removable parts of the car should be taken off. Mask off all surfaces that should not be coated. Mask off rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel wells and the underside of the vehicle from overspray. Clean and dry the surface to be sprayed, including the edges, then degrease with the FOLIATEC.com Carbody Spray Film Prefilter (item no. 79934). After cleaning, remove any remaining dust with a duster. Application with the FOLIATEC.com spray system: Apply FOLIATEC.com Carbody Spray Film in 4 to 5 generous coats. On horizontal surfaces (roof or hood), work slowly and at level 1 or 2: set the quantity control on the spray gun handle to level 1III. On vertical surfaces, work at a medium pace and level 2. If necessary, reduce the quantity control on the spray gun handle. Only use in suitable workshops and garages. Reduce ventilation if working in a spray booth. Application with a spray gun: Apply FOLIATEC.com Carbody Spray Film in 4 generous coats at a medium speed. Use a 2 to 2.5 mm spray nozzle at a pressure of 3 to 5 bar in a suitable spray booth. Flash for 10 minutes after each coat of spray. Note: The Carbody spray film is completely dry after 60 minutes. After 24 hours, the vehicle is ready to drive again.