FRAME DEFENDER PAINT PROTECTION FILM SET 31 PIECES

The Frame Defender paint protection film set is a quick and easy way to protect your paintwork from stone chips, scratches, wear and tear, and loss of value, helping to maintain the value of your bike. The universal 31-piece set made of high-strength polyurethane material is easy to apply and easy to remove.

Universal-Set of 31 pieces, cut out, ready to use
Available in clear or frosted glass
EXTREMELY STRONG: The high-strength polyurethane material is resistant to cold, heat, moisture, ice, salt, and UV radiation. Even high-pressure cleaners are no problem for the durable protective film.
WORKS AS A PAINT PROTECTION FILM: Protects the frame from stone chips, scratches, wear and tear and maintains the value of the bike.
EASY MOUNTING: The self-adhesive film can be mounted easily and bubble-free using a wet application method.
EASY TO REMOVE: Even after years of use, the paint protection film leaves no residue during removal and thus protects the paint.
Tip: We recommend leaving the film on the paint for a maximum of two years. Then it should be replaced!

Application
Thoroughly clean the surface where the film will be applied, removing any grease and dust residue. For cleaning, use silicone remover, isopropyl alcohol, or alcohol (alcohol-free and benzine-free). Dry the surface with a lint-free cotton cloth.
Remove the backing paper.
Generously spray the surface and the adhesive side of the film with a mixture of water and a few drops of dishwashing detergent.
Place the piece of film on the surface and position it.
Spray the film surface again, press it down, and peel it off from the center with a rubber squeegee or lint-free cotton cloth. Use a cotton cloth to remove or vacuum up the extracted liquid.