HARD ROCK LINER REMOVABLE SET BLACK PAINT 2 5 L HARDENER 0 5 L BASECOAT 2 5 L SPRAY GUN

PRODUCT INFORMATION Our newly developed Hard Rock Liner gives a new dimension to car design and provides a real "Wow!" effect: The rough, coarse look is not only a real eye-catcher, but also offers tremendous protection against damage and outside influences. And here's the kicker: Due to the removable primer, the applied film layer can be peeled off at any time without any additional means. For an aggressive look? Extremely robust, scratch-resistant, highly chemical- and temperature-resistant Removable - in combination with FOLIATEC.com Hard Rock Liner base coat The set includes: 2.5 liters HARD ROCK LINER BASE 2 liters HARD ROCK LINER HARD ROCK LINER 0.5 L HARD ROCK LINER HARD ROCK LINER a HARD ROCK SPRAY GUN + EMPTY BOTTLE APPLICATION Dismantle all easily removable parts of the car. Mask all surfaces not to be coated. Mask rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect the wheel housings and the underbody of the vehicle from spray mist. Clean and dry the surface to be sprayed, including the edges, then degrease it using the FOLIATEC.com Carbody Spray Film Pre-Filter (item no. 79934). After cleaning, remove any remaining dust with a feather duster. Applying Hard Rock Liner Basecoat with the FOLIATEC.com DIY Spray System: Apply Hard Rock Liner Basecoat in 2 generous coats. Work at a medium pace on level 2 and set the amount control on the pistol grip to level III or IIII. Applying with the Spray Gun: Apply Hard Rock Liner Basecoat in 2 generous coats at a medium pace. Use a 2.0 mm spray nozzle with a pressure of 2 - 3 bar in a suitable spray booth. Flash for 30 minutes after the first spray coat. Note: Can be recoated with Hard Rock Liner once completely dry (after 4 - 5 hours at 20 ° C depending on the layer thickness). Preparation of Hard Rock Liner: Shake the hardener well in the Hard Rock Liner for approximately 2 minutes. Fill the bottle from the spray gun, push the cap, break the seal and screw the spray gun onto the bottle. Applying Hard Rock Liner with the FOLIATEC.com Hard Rock Liner Gun: Apply Hard Rock Liner at a slow pace and pressure of 2.5 - 3 bar until a coverage of approximately 50% is reached. After approximately 60 minutes, a second coat should be applied for 100% coverage. Note: After 60 minutes, the Hard Rock Liner is powder-dry and should be allowed to dry for approximately 24 hours at a constant temperature. For further instructions, see the APPLICATION sheet.