HARD ROCK LINER BASECOAT 2 5 LITERS

PRODUCT INFORMATION The Hard Rock Liner base coat acts as the base for our Hard Rock Liner. It was developed to make Hard Rock Liner removable again. Ready to spray, can be painted over with FOLIATEC.com Hard Rock Liner? Easy to remove. APPLICATION Remove all easily removable car parts. Mask off all surfaces that should not be coated. Mask off rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel wells and the underside of the vehicle from overspray. Clean and dry the surface to be sprayed, including edges, then degrease using FOLIATEC.com Carbody Spray Film (item no. 79934). After cleaning, remove any remaining dust with a duster. Applying Hard Rock Liner Base Coat with the FOLIATEC.com DIY Spray System: Apply Hard Rock Liner Base Coat in two generous coats. Work at a medium pace on level 2 and set the quantity control on the spray gun handle to level III or IIII. Spray Gun Application: Apply Hard Rock Liner Base Coat in two generous coats at a medium pace. Use a 2.0 mm spray nozzle at a pressure of 2–3 bar in a suitable spray booth. Flash dry for 30 minutes after the first coat. Note: Hard Rock Liner can be topcoated once completely dry (after 4–5 hours at 20°C depending on the thickness of the coats). For further instructions, please refer to the APPLICATION sheet.